Home Top Ad

Download Samsung SM-A750G CTU Uruguay (Claro) A750GUBS3BSF2 firmware

Share:
Download the Samsung firmware for the SM-A750G with product code CTU from Uruguay (Claro). This firmware has version number PDA A750GUBS3BSF2 and CSC A750GOWA3BSF1. The operating system of this firmware is Android 9 , with build date Tue, 11 Jun 2019 16:41:05 +0000. Security patch date is 2019-06-01, with changelist 15516145.



ModelSM-A750G
Model nameGalaxy A7
Country
Uruguay
VersionAndroid 9
Changelist15516145
Build dateTue, 11 Jun 2019 16:41:05 +0000
Security Patch Level2019-06-01
Product codeCTU
PDAA750GUBS3BSF2
CSCA750GOWA3BSF1

Download

Instruction for flashing Samsung Phones with Odin.

1.Download the latest Samsung firmware file and then extract.After extracting you have 5 files.
   1.AP / Code /PDA (System &Recovery)
   2.BL (Boot loader)
   3.CP (Modem / Radio / Phone)
   4.CSC (Country / Region / Operator)
   5.HOME (Country / Region / Operator)
2. Download latest Odin for update or flashing firmware of your device and then put each file to its respective field in Odin.
If you want to flash with one file just Add MD5-file in AP-field in Odin.
3.Reboot your device in download mode.
   1.To enter download mode, following these steps:
   2.Power off your Samsung device
      Press same time :
       Method 1. POWER + VOLUME DOWN + BIXBY
    If method one is not work then try other method.
       Method 2. VOLUME DOWN + VOLUME UP then USB cable
       Method 3. POWER + VOLUME DOWN + VOLUME UP
       Method 4. POWER + VOLUME DOWN + HOME BUTTON
       Method 5. (ForNote9) USB cable + VOLUME DOWN + BIXBY
       Method 6. (Note10) POWER + VOLUME UP
3.Release all three buttons when Samsung phone reboot and you see a warning sign.
4.Press volume up to enter the main screen of recovery mode.
5.Once in download mode, connect your device to the PC (Be sure, the Samsung usb drivers are properly installed on your PC!).Odin should detect your device and a BLUE box will show up with the COM port number.
6.Click the start button, when the flashing process is start you see log in Odin, wait for some time Odin to say 'PASS' in a GREEN box. (be care full don't disconnect your device from PC.).Once the flash is complete, your device will automatically reboot, and now you can disconnect your phone from the PC.
Warning.
Flashing stock rom via Odin will definitely wipe your data. So make backup first. This is a general guide. No guarantee on anything. Do it at your own risk.

No comments